Name: Cutting discs
SKU: 948
Availability: InStock

Cutting discs

Description of the Akari 125 mm × 1 mm Cut‑Off Wheel

This is a 125 mm (≈ 5 inch) diameter cut-off disc with a thickness of 1 mm, designed for use on angle grinders or similar rotary tools.

Typical bore/hub size is about 22.2 mm / 22.23 mm, allowing mounting on standard 125 mm grinders.

Constructed from a bonded abrasive material (commonly aluminium oxide or similar) for cutting metal and stainless steel.

Key Specifications & Usage Notes

Diameter: 125 mm

Thickness: 1 mm

Bore/hub size: ~22.2 mm (check model)

Material: Metal / stainless steel (Inox) cutting disc, typically aluminium‐oxide based abrasive

Best used for: Thin metal sheet, profiles, tubes, stainless steel parts — where precision, minimal material waste and clean cuts matter

Important safety/usage points:

Ensure grinder speed (RPM) does not exceed disc’s rated RPM.

Use proper safety gear: eye protection, face shield, gloves, clamp workpiece securely.

Mount the disc correctly: flat against flange, guard in place.

Avoid side loads: these discs are meant for straight-on cutting, not grinding.

For thicker or tougher materials, a thicker disc might be more appropriate — ultra-thin 1 mm discs are for precision rather than heavy duty.

Size	115mm x 1mm, 125mm x 1mm, 180mm x 1.6mm, 115mm x 3mm (T41), 125mm x 3mm (T41)

Reviews

There are no reviews yet.

Be the first to review “Cutting discs”

Cutting discs